View M156B1-L01_6935468.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet provided by mass integrated massintegrated.com ? displayalliance.com please call +1.978.465.6190 email: sales@massintegrated.com iso 9001: 2008 mass integrated complies with all dmca takedown notices. please send a formal dmca takedown notice to mass integrated s ystems, inc. ?18 h enry graf jr. road, unit 1 ?newburyport, ma 01950. www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 1 / 26 version 2.0 tft lcd approval specification model no.: M156B1-L01 customer: approved by: note: ? ? ?? 2007-11-14 13:14:28 cst pmmd director cs_lee( ?} /56510/44926) director accept www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 2 / 26 version 2.0 - contents - revision history ............................................................................................................... ................ 3 1. general description ......................................................................................................... ......... 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings .................................................................................................... ... 5 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics .................................................................................................. .. 7 3. 1.1 tft lcd module 3.1.2 vcc power dip condition: 3.2 backlight unit 4. block diagram ............................................................................................................... ................ 11 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment ............................................................................................... . 12 5.1 tft lcd module 5.2 lvds data mapping table 5.3 backlight unit 5.4 color data input assignment 6. interface timing ............................................................................................................ ............... 15 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics ..................................................................................................... ...... 17 7.1 test conditions 7.2 optical specifications 8. packaging ................................................................................................................... ..................... 21 8.1 packing specifications 8.2 packing method 9. definition of labels ........................................................................................................ ............ 23 10. precautions ................................................................................................................ ................. 24 10.1 assembly and handling precautions 10.2 safety precautions 11. mechanical characteristics ................................................................................................. 25 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 3 / 26 version 2.0 revision history version date section description ver 2.0 nov.,09, 07? - M156B1-L01 approval specification was first issued. www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 4 / 26 version 2.0 1. general description 1.1 overview M156B1-L01 is a 15.6? tft liquid crystal display module with 2 ccfl backlight unit and 30pin 1ch-lvds interface. this module supports 1366 x 768 wxga mode and can display up to 16.7m colors. the inverter module for backlight is not built in. 1.2 features - contrast ratio 500:1 - response time 8ms. - brightness 250nits - color saturation ntsc 65%. - wxga (1366 x 768 pixels) resolution. - de (data enable) only mode. - lvds (low voltage differential signaling) interface. - rohs compliance. 1.3 application - tft lcd monitor 1.4 general specificati0ns item specification unit note active area 344.232(h) 193.536(v) (15.6? diagonal) mm bezel opening area 347.5(h)x196.8(v) mm (1) driver element a-si tft active matrix - - pixel number 1366 x r.g.b. x 768 pixel - pixel pitch 0.252 (h) x 0.252 (v) mm - pixel arrangement rgb vertical stripe - - display colors 16.7m color - transmissive mode normally white - - surface treatment ag type, 3h hard coating, haze 25 - - 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 363.3 363.8 364.3 mm vertical(v) 215.4 215.9 216.4 mm module size depth(d) 13.8 14.3 14.8 mm (1) weight - 1300 g - note (1) please refer to the attached drawings for more information of front and back outline dimensions. www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 5 / 26 version 2.0 2. absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 60 oc (1) operating ambient temperature t op 0 50 oc (1), (2) shock (non-operating) s nop - 50 g (3), (5) vibration (non-operating) v nop - 1.5 g (4), (5) note (1) temperature and relative humidity range is shown in the figure below. (a) 90 %rh max. (ta Q 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the temperature of panel display surface area should be 0 oc min. and 60 oc max. note (3) 11ms, half sine wave, 1 time for x, y, z. note (4) 10 ~ 300 hz, 10min/cycle, 3 cycles each x, y, z. note (5) at testing vibration and shock, the fixtur e in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. the fixing condition is shown as below: storage range relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 80 40 60 20 5 90 side mount fixing screw side mount fixing screw stage bracket lcd module gap=2mm a t room tem p erature www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 6 / 26 version 2.0 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage vcc -0.3 +6.0 v (1) 2.2.2 backlight unit value item symbol min. max. unit note lamp voltage v l 2.5k v rms (1), (2) lamp current i l 3 8 ma rms lamp frequency f l 50 60 khz (1), (2) also see page.10 note(7) note (1) permanent damage might occur if the module is operated at conditions exceeding the maximum values. note (2) specified values are for lamp (refer to 3.2 for further information). www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 7 / 26 version 2.0 3. electrical characteristics 3.1.1 tft lcd module ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage vcc 4.5 5.0 5.5 v - ripple voltage v rp - - 100 mv - rush current i rush 1.5 a (2) white 0.3 0.35 a (3)a black 0.35 0.41 a (3)b power supply current vertical stripe - - - 0.4 0.45 a (3)c lvds differential input voltage vid 100 - 600 mv lvds common input voltage vic - 1.2 - v note (1) the module should be always operated within above ranges. note (2) measurement conditions: vcc rising time is 470 s 470 s vcc gnd 0.9vcc 0.1vcc r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc +5.0v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 8 / 26 version 2.0 note (3) the specified power supply current is under the conditions at vcc = 5.0 v, ta = 25 2 oc, f v = 60 hz, whereas a power dissipation check pattern below is displayed. 3.1.2 vcc power dip condition: dip condition: ms td v vcc v 20 , 5 . 4 0 . 4 active area a. white pattern active area c. vertical stripe pattern r r r r r r r r g g g g b b b b b b g g g g b b b b r r active area b. black pattern vcc 4.5v 4.0v td www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 9 / 26 version 2.0 3.2 backlight unit ta = 25 2 oc value parameter symbol min. typ. max. unit note lamp input voltage v l 585 650 715 v rms i l = 7.0 ma lamp current i l 3.0 7.0 8.0 ma rms (1) 1200 (0 ) v rms (2) lamp turn on voltage v s 1100 (25 ) v rms (2) operating frequency f l 50 55 60 khz (3)(7) lamp life time l bl 40,000 50,000 hrs (5), i l = 7.0ma power consumption p l 9.24 w (4), i l = 7.0 ma note (1) lamp current is m easured by current amplify & o scilloscope as shown below: measure equipment: current amplify: tektronix tcpa300 current probe: tektronix tcp312 oscilloscope: tds3054b note (2) the voltage that must be larger than vs should be applied to the lamp for more than 1 second after startup. otherwise, the lamp may not be turned on normally. note (3) the lamp frequency may produce interference with horizontal synchronization frequency from the display, which might cause line flow on the display. in order to avoid interference, the lamp frequency should be detached from the horizontal synchronization frequency and its harmonics as far as possible. note (4) p l = i l v l 2 (for 2 lamps) note (5) the lifetime of lamp can be defined as the time in which it continues to operate under the condition ta = 25 2 o c and i l = 7.0 marms until one of the following events occurs: (a) when the brightness becomes Q 50% of its original value. (b) effective lighting lengt h decreases 80% under for initial. (eff ective lighting length is a scope of luminance 80% over for average luminance at several point in lamp center.) note (6) the waveform of the voltage output of invert er must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter s hould be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. when designing or ordering the lcd module inverter hv ( + ) oscillosco p e ???? hv ( - ) hv ( + ) hv ( - ) ???? current amplify current probe www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 10 / 26 version 2.0 inverter please make sure that a poor lighting ca used by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occu rs. if the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. the output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(unsy mmetrical ratio is less than 10%) please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. it shall help increase the lamp lifetime and reduce its leakage current. a. the asymmetry rate of the inverter waveform should be 10% below; b. the distortion rate of the waveform should be within 2 10%; c. the ideal sine wave form shall be symmetric in positive and negative polarities note (7) 50~60khz, the frequency range can guarantee the optical and electrical char acteristics; 40~80khz the frequency range will not effect the lifetime and reliability characteristics. i p i -p * asymmetry rate: | i p ? i ?p | / i rms * 100% * distortion rate i p (or i ?p ) / i rms www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 11 / 26 version 2.0 4. block diagram 4.1 tft lcd module 4.2 backlight unit tft lcd panel (1366x3x768) data driver ic scan driver ic backlight unit lvds input / timing controller dc/dc converter & reference voltage input connector (stm msakt2407p30a or equivalent) v l vcc rx0(+/-) rx1(+/-) rx2(+/-) rx3(+/-) rxc(+/-) nc lamp connector (yeonho 35001hs-02l) 1 hv(pink) 2 lv(white) 1 hv(pink) 2 lv(white) gnd www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 12 / 26 version 2.0 5. input terminal pin assignment 5.1 tft lcd module pin name description 1 nc not connection, this pin should be open. 2 nc not connection, this pin should be open. 3 nc not connection, this pin should be open. 4 gnd ground 5 rx0- negative lvds differential data input. channel 0 6 rx0+ positive lvds differential data input. channel 0 7 gnd ground 8 rx1- negative lvds differential data input. channel 1 9 rx1+ positive lvds differential data input. channel 1 10 gnd ground 11 rx2- negative lvds differential data input. channel 2 12 rx2+ positive lvds differential data input. channel 2 13 gnd ground 14 rxclk- negative lvds differential clock input. 15 rxclk+ positive lvds differential clock input. 16 gnd ground 17 rx3- negative lvds differential data input. channel 3 18 rx3+ positive lvds differential data input. channel 3 19 gnd ground 20 nc not connection, this pin should be open. 21 nc not connection, this pin should be open. 22 nc reserved. (for internal test used) 23 gnd ground 24 gnd ground 25 gnd ground 26 vcc +5.0v power supply 27 vcc +5.0v power supply 28 vcc +5.0v power supply 29 vcc +5.0v power supply 30 vcc +5.0v power supply note (1) connector part no.: stm msakt2407p30a or starconn 093g30-b0001a www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 13 / 26 version 2.0 5.2 lvds mapping table lvds output d7 d6 d4 d3 d2 d1 d0 lvds channel 0 data order g0 r5 r4 r3 r2 r1 r0 lvds output d18 d15 d14 d13 d12 d9 d8 lvds channel 1 data order b1 b0 g5 g4 g3 g2 g1 lvds output d26 d25 d24 d22 d21 d20 d19 lvds channel 2 data order de na na b5 b4 b3 b2 lvds output d23 d17 d16 d11 d10 d5 d27 lvds channel 3 data order na b7 b6 g7 g6 r7 r6 5.3 backlight unit: pin symbol description remark 1 hv high voltage pink 2 lv low voltage white note (1) connector part no.: yeonho 20015hs-04lb or equivalent www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 14 / 26 version 2.0 5.4 color data input assignment the brightness of each primary color (red, green an d blue) is based on the 8-bit gray scale data input for the color. the higher the binary input, the brighter t he color. the table below provides the assignment of color versus data input. data signal red green blue color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0) / dark red(1) red(2) : : red(253) red(254) red(255) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0) / dark green(1) green(2) : : green(253) green(254) green(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0) / dark blue(1) blue(2) : : blue(253) blue(254) blue(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 15 / 26 version 2.0 t h t c dclk t hd t vd t v de de data t vb t hb 6. interface timing 6.1 input signal timing specifications the input signal timing specifications are shown as the following table and timing diagram . signal item symbol min. typ. max. unit note frequency fc 50.0 76 85 mhz - period tc - 13.0 - ns high time tch - 4/7 - tc - lvds clock low time tcl - 3/7 - tc - setup time tlvs 600 - - ps - lvds data hold time tlvh 600 - - ps - frame rate fr 40 60 76 hz tv=tvd+tvb total tv 778 806 888 th - display tvd 768 768 768 th - vertical active display term blank tvb tv-tvd 38 tv-tvd th - total th 1446 1560 1936 tc th=thd+thb display thd 1366 1366 1366 tc - horizontal active display term blank thb th-thd 194 th-thd tc - note: because this module is operated by de onl y mode, hsync and vsync input signals should be set to low logic level or ground. otherwise, this module would operate abnormally. input signal timing diagram www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 16 / 26 version 2.0 6.2 power on/off sequence to prevent a latch-up or dc operation of lcd module, the power on/off sequence should be as the diagram below. timing specifications: 0.5< t1 Q 10 msec 0 < t2 Q 50 msec 0 < t3 Q 50 msec t4 R 500 msec t5 R 450 msec t6 R 90 msec - power supply for lcd, vcc - interface signal (lvds signal of transmitter), v i - power for lamp restart power on power off 50% 50% 0v 0v 10% t6 t5 t4 t3 t2 t1 90% 10% 90% valid data on off off www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 17 / 26 version 2.0 7. optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 252 o c ambient humidity ha 5010 %rh supply voltage v cc 5v v input signal according to typical val ue in "3. electrical characteristics" lamp current i l 7.0 ma inverter operating frequency f l 555 khz inverter darfon vk12164.101 7.2 optical specifications the relative measurement methods of optical characteri stics are shown in 7.2. the following items should be measured under the test conditions described in 7.1 and stable environment shown in note (5). item symbol condition min. typ. max. unit note rx 0.638 red ry 0.333 gx 0.290 green gy 0.591 bx 0.153 blue by typ - 0.03 0.082 typ + 0.03 wx 0.283 0.313 0.343 color chromaticity (cie 1931) white wy 0.299 0.329 0.359 - (1), (5) center luminance of white (center of screen) l c 210 250 - cd/m 2 (4), (5) contrast ratio cr x =0 , y =0 cs-1000t 350 500 - - (2), (5) t r - 2 4 t f - 6 12 response time t gtg_ave_ x =0 , y =0 - - ms (3), (7) white variation w x =0 , y =0 usb2000 - 1.4 1.5 - (5), (6) x + 50 55 - horizontal x - 50 55 - y + 25 30 - viewing angle vertical y - cr R 5 bm5a 50 55 - deg. (1), (5) x + 40 45 - horizontal x - 40 45 - y + 15 20 - viewing angle vertical y - cr R 10 bm5a 40 45 - deg. (1), (5) www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 18 / 26 version 2.0 note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l255 / l0 l255: luminance of gray level 255 l 0: luminance of gray level 0 cr = cr (1) cr (x) is corresponding to the contrast ratio of the point x at figure in note (6). note (3) definition of response time (t r , t f ): 12 o?clock direction y - = 90o x ? + y- y + x- y+ y- x+ normal x+ = 90o x- = 90o optical response 100% 90% 10% 0% gray level 255 gray level 0 gra y level 255 t ime t f t r 66.67ms 66.67ms www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 19 / 26 version 2.0 note (4) definition of luminance of white (l c ): measure the luminance of gray level 255 at center point l c = l (1) l (x) is corresponding to the luminance of the point x at figure in note (6). note (5) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. cs-1000t 500 mm lcd module lcd panel center of the screen light shield room (ambient luminance < 2 lux) usb2000 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 20 / 26 version 2.0 note (6) definition of white variation ( w): measure the luminance of gray level 255 at 13 points w = 10mm w/4 w 10mm h/4 h 10mm w/4 w/4 h/4 h/4 11 9 h/4 6 4 12 1 2 7 10mm w/4 5 13 10 3 8 note (7) definition of response time (t gtg_ave ): t gtg_ave is defined as the total average response time for ?gray to gray ?. the gray to gray response time is defined as the following chart. target gray gray to gray g0 g32 g64 g96 g128 g160 g192 g224 g255 g0 g32 g64 g96 g128 g160 g192 g224 initial gray g255 maximum [l(1), l(2), l( 3), l(4), l(5), l(6), l(7), l(8), l( 9), l(10), l(11), l(12), l(13)] minimum [l(1), l(2), l(3), l(4), l(5), l(6), l( 7), l(8), l(9), l(10), l(11), l(12), l(13)] vertical line number test point x 1 to 13 x a ctive area horizontal line number www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 21 / 26 version 2.0 8. packaging 8.1 packing specifications (1) 10 lcd modules / 1 box (2) box dimensions: 489(l) x 382(w) x 330(h) mm (3) weight: approximately 15.7kg (10 modules per box) 8.2 packing method (1) carton packing should have no failure in the following reliability test items. test item test conditions note vibration ista standard random, frequency range: 1 ? 200 hz top & bottom: 30 minutes (+z), 10 min (-z), right & left: 10 minutes (x) back & forth 10 minutes (y) non operation dropping test 1 angle, 3 edge, 6 face, 60cm non operation figure. 8-1 packing method www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 22 / 26 version 2.0 sea and land transportation figure. 8-2 packing method figure. 8-3 packing method air transportation www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 23 / 26 version 2.0 9. definition of labels 9.1 cmo module label the barcode nameplate is pasted on each module as illustrati on, and its definitions are as following explanation. (a) model name: M156B1-L01 (b) revision: rev. xx, for example: a0, a1? b1, b2? or c1, c2?etc. (c) cmo barcode definition: serial id: xx -xx -x -xx -ymd -l -nnnn code meaning description xx cmo internal use - xx revision cover all the change x cmo internal use - xx cmo internal use - ymd year, month, day year: 2001=1, 2002=2, 2003=3, 2004=4? month: 1~12=1, 2, 3, ~, 9, a, b, c day: 1~31=1, 2, 3, ~, 9, a, b, c, ~, w, x, y, exclude i, o, and u. l product line # line 1=1, line 2=2, line 3=3, ? nnnn serial number manufacturing sequence of product (d) customer?s barcode definition: serial id: cm -15b11 -x -x -x -xx -l -xx -l -ymd -nnnn code meaning description cm supplier code cmo=cm 15b11 model number M156B1-L01 = 15b11 x revision code non zbd: 1,~,9,0 / zbd: a~z x source driver ic code x gate driver ic code century=1, cll=2, demos=3, epson=4, fu jitsu=5, himax=6, hitachi=7, hynix=8, ldi=9, matsushita=a, nec=b, novatec=c, oki=d, philips=e, renasas=f, samsung=g, sanyo=h, sharp=i, ti=j , topro=k, toshiba=l, windbond=m xx cell location tainan taiwan=tn, ningbo china=np l cell line # 1~12=0~c xx module location tainan taiwan=tn, ningbo china=np l module line # 1~12=0~c ymd year, month, day year: 2001=1, 2002=2, 2003=3, 2004=4? month: 1~12=1, 2, 3, ~, 9, a, b, c day: 1~31=1, 2, 3, ~, 9, a, b, c, ~, t, u, v nnnn serial number by lcd supplier www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 24079535 issued date: nov. 09 , 2007 model no.: M156B1-L01 approval 24 / 26 version 2.0 10. precautions 10.1 assembly and handling precautions (1) do not apply rough force such as bending or twisting to the module during assembly. (2) to assemble or install module into user?s system can be only in clean working areas. the dust and oil may cause electrical short or worsen the polarizer. (3) it?s not permitted to have pressure or impulse on the module because the lcd panel and backlight will be damaged. (4) always follow the correct power sequence when lcd module is connecting and operating. this can prevent damage to the cmos lsi chips during latch-up. (5) do not pull the i/f connector in or out while the module is operating. (6) do not disassemble the module. (7) use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) it is dangerous that moisture come into or c ontacted the lcd module, because moisture may damage lcd module when it is operating. (9) high temperature or humidity may reduce the per formance of module. please store lcd module within the specified storage conditions. (10) when ambient temperature is lower than 10oc may reduce the display quality. for example, the response time will become slow ly, and the starting voltage of ccfl will be higher than room temperature. 10.2 safety precautions (1) the startup voltage of backlight is approximat ely 1000 volts. it may cause electrical shock while assembling with inverter. do not disassemble the mo dule or insert anything into the backlight unit. (2) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) after the module?s end of life, it is not harmful in case of normal operation and storage. www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of M156B1-L01

	To Download M156B1-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .